Adding one of MultiCam’s Automatic Tool Changer systems is certain to improve production time by changing tools faster and more efficiently.

Automatic Tool Changing Systems (ATC) Features:

  • Very easy to use. No special post processor sub routines needed.
  • Spindle uses standard tool holders and ER collets.
  • 12 position rotary Carousel on 3000, 5000, 7000, 8000, and MT Series Machines.
  • Rotary carousels have bidirectional rotation, automatic tool length calibration, and built in tool change routines.
  • 4 and 8 position Linear ATC systems on 1000 and 3000 Series Machines.
  • Automatic Tool Length Compensation with touch probe to automatically calibrate and store tool length offsets. This data is then stored and is automatically addressed by our motion controller.
  • Auto Starting – The spindle is automatically started at the beginning of the file and turned off at the end.
  • Digital Spindle Speed – Digital, programmable spindle speed gives real time feedback of the current spindle speed. Exact spindle speeds can be entered in the files and adjusted at the keypad in real time.
  • Torque Monitoring – The current draw of the spindle is displayed on the keypad during cutting. This allows the user to monitor the cutter for wear.
Rotary Automatic Tool Changer

12-Position Rotary Tool Changer; Bidirectional rotation

8000 Series 5-Axis Router ATC

12-Position Rotary Tool Changer; Bidirectional rotation

8-Position Linear Tool Changer

8-Position Linear Tool Changer