Customer Installations - MultiCam Canada

Skip to content

CNC Machines
Support
- Service and Parts
- Training and Installation
Installations
CNC Knowledge Base
E-Commerce
Financing
Contact Us

CNC Machines
Support
- Service and Parts
- Training and Installation
Installations
CNC Knowledge Base
E-Commerce
Financing
Contact Us

© 2019

Customer Installations

All
CNC Routers
CNC Plasmas
CNC Digital Finishing
CNC Lasers
CNC Waterjet

+
Sammy and Sons Real Estate Management

Sammy and Sons is a Residential and Commercial Property Management company based out of Peterborough, ON. MultiCam ...

Sammy and Sons Real Estate Management

Installation Type APEX 3R CNC Router

Sammy and Sons is a Residential and Commercial Property Management company based out of Peterborough, ON. MultiCam recently installed a APEX3R Router ,enabling Sammy and Sons to cut a variety of materials, including plastic, wood, foam, and composite materials. The Apex 3R features a heavy, all-steel tube frame that ensures durability. It also makes their CNC machine more rigid, which reduces vibration and improves routing quality. Multicam includes the EZ Control operator interface so you can start routing right away and have minimal interruption in your work processes. A three-axis motion control system gives you tight control over routing quality for precision and quality cutting your customers will love.

+
Price Industries Inc

Price Industries, Inc. manufactures HVAC products. The Company offers air distribution products including fan and ...

Price Industries Inc

Installation Type V-Series CNC Plasma
Industry Metal Fabrication
Customer Since 2021
Website https://www.priceindustries.com/

Price Industries, Inc. manufactures HVAC products. The Company offers air distribution products including fan and blower coils, ceiling systems, diffusers, grilles and registers, and noise control equipment.

MultiCam Canada recently installed the V-Series CNC Plasma, that will allow Price Industries Inc to cut through mild and stainless steel, aluminum, brass, and copper with minute precision. The base frame is made of welded steel with stringers fabricated from aerospace-grade aluminum. Reinforced steel leg supports work together with all this to ensure a high degree of rigidity, minimal vibration, and – precision cutting. Every MultiCam V-Series CNC Plasma Table comes with a Hypertherm cutting system enabling rapid and consistent cut quality. The PowerMax torches offer a wide cutting capacity on aluminum and mild steel with the V-Series that will help Price Industries Inc gain excellent consumable life with air or oxygen.

+
Cambrian College

Cambrian College has been the leading post-secondary institution in Northern Ontario since 1967. They have ...

Cambrian College

Installation Type 5000 Series CNC Waterjet
Industry College, Research and Development
Customer Since 2021
Website https://cambriancollege.ca

Cambrian College has been the leading post-secondary institution in Northern Ontario since 1967. They have a nationally-recognized applied research and development team that helps industry partners from all sectors solve their R&D challenges by supporting research and product development needs, providing access to specialized research technology such as 3D printers, 5-axis CNC milling machine, and waterjet cutter for prototype development. MultiCam Canada recently installed the 5000 Series CNC Waterjet to be part of Cambrian’s Applied Research Department. The 5000 Series CNC Waterjet is an easy to use 5-axis cutting system and is perfect for end-users requiring high-performance and precision. Constructed of an all steel frame, the 5000 Series CNC Waterjet nearly eliminates vibration and this durability helps cutting even the most intricate of parts accurate and clean.

+
Sticker-it

Sticker-it is an established sign and vehicle graphics company. They have expanded to offer a wide variety of ...

Sticker-it

Installation Type Celero 3 Series CNC Digital Finishing
Industry Design, print products and sign manufacturing/service
Customer Since 2021
Website https://www.sticker-it.ca/

Sticker-it is an established sign and vehicle graphics company. They have expanded to offer a wide variety of design, print products and sign manufacturing/service and have a high level of knowledge and understanding within the printing and marketing industry. In addition, they work with clients to provide eye-catching designs and branding materials that includes; Strategic planning and consultation, concept and creative design, project management, product solution, production and manufacturing and Installation MultiCam Canada recently installed the Celero 3 CNC Digital Finishing machine in the Sticker-it Dunnville location. The Celero 3 Series is an economical turnkey cutter/router solution for the small-to-mid size Print Service Provider. This system is suited to provide versatility as it can cut a multitude of materials with a high-degree of precision. Its modular tooling includes Universal and Oscillating Knives as well as a 3 HP Router Spindle. Equipped with a high-frequency spindle, the Celero 3 Series is designed to produce an accurate and smooth motion when cutting either thin or dense substrates. Along with a robust Servo Drive Motor system, the Celero offers maximum flexibility for multiple cutting application as it comes standard with a routing spindle, universal knife, and oscillating knife.

+
Tazarmc

Tazarmc is a professional group providing Constructibility Solutions to multi-disciplined industrial and ...

Tazarmc

Installation Type 3000 Series CNC Plasma
Industry Structural Steel and miscellaneous Metal Fabrication
Customer Since 2021
Website https://www.tazarmc.com/

Tazarmc is a professional group providing Constructibility Solutions to multi-disciplined industrial and commercial projects throughout Canada and the United States. Their steel division is capable of fabricating and installing 320 Tons of structural steel and Misc Metals per month. Their fabrication facility of 20,000 sqf + 3 Acres of yard; is fully equipped with the state of the art machines, equipment, OH Cranes with the latest addition to their lineup being the MultiCam 3000 CNC Plasma equipped with Hypertherm XPR 300. Tazarmc will experience almost no vibration when cutting, which means they will get a highly precise cut every time when using thee 3000 Series CNC Plasma Table. Tazarmc will also be able to cut corners without wasting time because of the high-speed contouring system you get with the 3000 Series CNC Plasma Table. The 3000 Series CNC Plasma table also comes with the integrated material database that automates the material cutting process. With the material database, Tazarmc will simply select the material to be cut and the parameters such as feed-rate, pierce delay, pierce height, and others will adjust automatically. Every MultiCam 3000 CNC Plasma series is equipped with a Hypertherm XPR Plasma cutting system. These systems achieve impressive cut speeds, consistent cut quality and exceptional consumable life. MultiCam 3000 series CNC Plasma with fume evacuation tables use Hypertherm XPR plasma cutting systems to provide a wide cutting capacity on metals including aluminum and mild steel.

+
Acryl Design

Acryl Designs is known for its custom design services such as sneeze guards, house and door numbers under a ...

Acryl Design

Installation Type Apex 1R CNC Router
Industry House Numbers and Sneeze Guards
Customer Since 2021
Website https://www.acryldesign.com/

Acryl Designs is known for its custom design services such as sneeze guards, house and door numbers under a collection of specialty brand names. They recently added MultiCam’s Apex 1R CNC Router to increase productivity in their workshop. MultiCam’s APEX 1R CNC router is loaded with standard features normally associated with more expensive CNC routers, and comes with an 8 station linear automatic tool changer that will give Acryl Designs maximum machining flexibility. Acryl Designs will use the Apex 1R CNC Router to cut a multitude of materials they require such as composite material, foam, plastic, wood, and much more.

+
Rovee Cabinetry and Woodwork Inc.

Based in Ottawa, Ontario, Rovee Cabinetry and Woodwork Inc. has been a trusted manufacturer of quality custom ...

Rovee Cabinetry and Woodwork Inc.

Installation Type Apex 1R CNC Router
Industry Cabinetry and Woodwork
Customer Since 2021
Website https://www.rovee.ca/

Based in Ottawa, Ontario, Rovee Cabinetry and Woodwork Inc. has been a trusted manufacturer of quality custom cabinetry for almost three decades. Over the years they have gained trust and loyalty of home and business owners in the community because of their ability to provide quality products. MultiCam Canada installed the Apex 1R CNC Router system. MultiCam’s APEX 1R CNC router is loaded with standard features normally associated with more expensive CNC routers, and comes with an 8 station linear automatic tool changer that will give Rovee Cabinetery and Woodwork maximum machining flexibility. The Apex 1R CNC Router is designed to cut a multitude of materials such as composite material, foam, plastic, wood, and much more, meeting the requirements of Rovee Cabinetery and Woodwork.

+
Innovative Displays

Innovative Displays specializes in grand format printing, signage fabrication and display systems, servicing ...

Innovative Displays

Installation Type Magnus CO2 Laser
Industry Print and Digital
Customer Since 2019
Website www.innovativedisplays.com

Innovative Displays specializes in grand format printing, signage fabrication and display systems, servicing agencies, brokers and other printers.

MultiCam Canada installed the Magnus CO2 Laser for its customer Innovative Displays. The Magnus CO2 is powerful CNC laser that can cut or engrave nearly any application and is one of the fastest engraving systems on the market. It is also capable of quickly and efficiently processing large areas at a resolution equivalent to printing. The Magnus CO2 Laser can cut square corners without leaving a radius common to routers, and drastically reduces the need to flame polish or run a secondary operation to finish cut pieces.

Now that Innovative Displays has include the Magnus CO2 Laser system, they will save 40% in material usage by reducing the space in-between cut parts. Capable of cutting a wide variety of materials, the Magnus CO2 Laser system is one of the most cost effective and flexible CNC solutions to get the job done.

+
Western Safety Signs

Since 1982 Western Safety Signs have manufactured Safety and Commercial Signs for businesses across North America ...

Western Safety Signs

Installation Type Apex 1R CNC Router
Industry Sign and Print
Customer Since 2020
Website https://www.westernsafetysign.com/

Since 1982 Western Safety Signs have manufactured Safety and Commercial Signs for businesses across North America such. Their product line up include signs, decals, banners, tags, placards, stencils, engraved, braille signs, and more. MultiCam recently installed an APEX 1R CNC router, a next generation CNC machine loaded with standard features normally associated with more expensive machines. The Apex 1R comes with an 8 station linear automatic tool changer giving the user maximum machining flexibility. The Apex 1R is a versatile and durable machine that is designed to cut a multitude of materials such as composite material, foam, plastic, wood, and much more.

+
Mi5 Print and Digital

Mi5 Print and Digital is the best in class litho, digital and wide format commercial print solutions and custom ...

Mi5 Print and Digital

Installation Type Magnus CO2 Laser
Industry Print and Digital
Customer Since 2018
Website www.mi5print.com

Mi5 Print and Digital is the best in class litho, digital and wide format commercial print solutions and custom product development company.

Mi5 Print and Digital is a high paced print and digital company that required a laser that can keep up with its demand and remain one step ahead of the competition. MultiCam’s Magnus CO2 Laser was the perfect addition to there business plans. The Magnus CO2 Laser is one of the best selling Laser CNC systems on the market and one of the fastest engraving systems too. When equipped with engraving accessories, the Magnus is capable of quickly and efficiently processing large areas at a resolution equivalent to printing. By combining prominent engineering developments and the latest in Laser technologies the Magnus Laser can produce quality finishes on a vast amount of materials and a variety of applications. Since the Laser system performs at such a high-degree of precision compared to other cutting alternatives, it will save Mi5 Print and Digital up to 40% in material usage by reducing the space in-between cut parts.

Capable of cutting a wide variety of materials, the Magnus CO2 Laser system is one of the most cost effective and flexible CNC solutions to get the job done.

+
Pratt Sheet Metal

Pratt Sheet Metal is a custom manufacturing shop as well as an HVAC shop, sheet metal sales depot and sales of ...

Pratt Sheet Metal

Installation Type 3000 Series CNC Plasma
Industry Sheet Metal Fabrication
Customer Since 2020
Website www.prattsheetmetal.com

Pratt Sheet Metal is a custom manufacturing shop as well as an HVAC shop, sheet metal sales depot and sales of metal roofing. Their services include CNC Plasma cutting using the MultiCam 3000 Series CNC Plasma CNC Fabrication machine, forming with CNC Hydraulic and Mechanical presses, Shear Cutting, Punching by tool and Welding.

As part of Pratt Sheet Metal’s expansion, MultiCam installed the 3000 Series CNC Plasma a sturdy and rigid all-steel plate frame, which means they can experience almost no vibration when cutting, resulting in a highly precise cut every time. Cutting corners won’t cost them serious time too because of the 3000 Series CNC plasma table’s high-speed contouring system.

In addition to the 3000 Series CNC Plasma, MultiCam also installed the Hypertherm XPR 300 Plasma cutting system. Every MultiCam 3000 CNC Plasma series is equipped with a Hypertherm XPR Plasma cutting system. These systems achieve impressive cut speeds, consistent cut quality and exceptional consumable life. With unmatched X-Definition™ cut quality on mild steel, stainless steel and aluminum, the new XPR300 increases cut speed, dramatically improves productivity and slashes operating costs by over 50%. New ease-of-use features and engineered system optimization make the XPR300 easier to run with minimal operator intervention, while also ensuring optimal performance and unmatched reliability.

+
KristoFOAM

kristoFOAM Industries Inc. is a full service supplier of custom foam packaging products and material handling and ...

KristoFOAM

Installation Type 1000 Series CNC Waterjet
Industry Moulded And Fabricated Foam Parts
Customer Since 2019
Website https://kristofoam.com/

kristoFOAM Industries Inc. is a full service supplier of custom foam packaging products and material handling and packaging systems (such as custom foam gaskets, cushion packaging and kits). Using a hands-on approach to product design, program launch and ongoing program support, they are considered an industry leader within the various markets they serve.

MultiCam Canada installed a 1000 Series CNC WaterJet, the perfect platform for accurate and quality cuts every time. The Multicam 1000 Series CNC Waterjet comes equipped with MultiCam’s EZ Control G-Code and Coreo software that ensures a simple yet effective workflow. Combined with Coreo, an intuitive CAD/CAM software, KristoFOAM will have the ability to draw, program, and cut within the same program.

+
Light Visions

For 34 years Light Visions has turned big ideas into big realities in the retail, outdoor advertising and display ...

Light Visions

Installation Type Celero 7 Series CNC Digital Finishing
Industry Sign, Retail and Displays
Customer Since 2019
Website www.lightvisions.ca

For 34 years Light Visions has turned big ideas into big realities in the retail, outdoor advertising and display industries. Light Visions is a leader in floor graphics, window graphics, signage, displays, and billboards, and required a digital finishing machine that was able to keep up with demand. The Celero 7 Series was crucial addition to their production as it substantially reduces sheet-to-sheet time and helps maximize production because of its ability to easily switch from one substrate to the other since all the cutting tools are readily available and no special tools or calibration are required to change from one substrate to another. The Celero 7 Series provide the industry’s highest quality of accuracy for repeatable cutting and is engineered to provide end-users unparalleled performance as well as pristine cut quality.

Additionally, the Celero 7 Series Automatic Tool Changer system holds up to 18 tools which include up to nine (9) router bits and nine (9) knives. Designed to automatically change between knife and router cutting tools in a single job file, this system is intended to greatly reduce the possibility of operator-error and material waste.

During the 2020 COVID-19 pandemic, Light Visions have been very active in producing COVID-19 protection products to help companies cope with the task of trying to stay open during this Pandemic. Using the Celero 7 Series they were able to produce all types of shields, floor graphics and warning signage, and even designed a special low cost shield to supply to schools. With the Celero 7 Series they were able to keep up the demand because of its outstanding speed..

Read more about Light Visions Response to school safety using the Celero 7 Series

+
Cyclone Manufacturing

MultiCam Canada installed a 3000 Series CNC Waterjet along with the KMT 90,000 PSI 125 HP pump for its customer, ...

Cyclone Manufacturing

Installation Type 3000 Series CNC Waterjet
Industry Sheet Metal Fabrication
Customer Since 2020
Website www.cyclonemfg.com

MultiCam Canada installed a 3000 Series CNC Waterjet along with the KMT 90,000 PSI 125 HP pump for its customer, Cyclone Manufacturing. Cyclone Manufacturing has an impressive history that began with the production of aircraft parts and were the first to manufacture indexable cutters, which are now used throughout the industry. Due to demand Cyclone expanded its sheet-metal fabrication, assembly and heat treatment capabilities with the addition of a second, state-of-the art 40,000 square foot facility in Milton, Ontario. The 3000 Series CNC Waterjet was an important addition to Cyclone Manufacturings fabrication because of its versatility in cutting applications. The 3000 Series CNC Waterjet gives Cyclone Manufacturing the ability to cut their 4″ titanium material accurately and as quickly as possible. Including MultiCam’s 3000 Series CNC Waterjet alongside their equipment under one roof enables Cyclone to deliver comprehensive and cost-effective sheet metal fabrication services, all in one place. In addition to cutting and forming, Cyclone also provides on-site heat treatment, aging, freezing, sub-zero storage, and corrective forming.

+
PTNR Production

PTNR Production Inc is a custom manufacturer of printed and fabricated displays, specifically SEG and aluminum ...

PTNR Production

Installation Type Celero 7 Series CNC Digital Finishing
Industry Print, Display and Exhibitions
Customer Since 2019
Website www.ptnr.ca

PTNR Production Inc is a custom manufacturer of printed and fabricated displays, specifically SEG and aluminum extrusion, millwork and metal displays.

PTNR Production Inc was looking to automate as many processes as possible throughout there production to support their relentless pursuit of client satisfaction. In addtion to this, PTNR’s 10ft roll to roll printer that requires a large flat bed cutting system that is capable of high speed production. MultiCam Canada recently installed the Celero 7 Series CNC Digital Finishing that will help increase PTNR Production Inc’s competitiveness in the marketplace by providing them the most advanced digital cutting system that utilizes its linear motion technology to maximize production.

Perfectly engineered to provide end-users with unparalleled performance as well as pristine cut quality, the Celero 7 Series substantially reduces sheet-to-sheet time and helps maximize production because of its ability to easily switch from one substrate to the other since all the cutting tools are readily available and no special tools or calibration are required to change from one substrate to another.

By including the MultiCam Celero 7 Series into PTNR Production’s line up, they have increased their competitiveness in the marketplace by automating the cutting processes without requiring skilled operators to make adjustments after each job. PTNR Production now offers all print and build fabrication in house, making them one of the very few companies in the region that has become a one stop shop for all their customers needs.

www.ptnr.ca

+
Southeast Welding

Denis & Christian Petitpas of Southeast Welding in Cap-Pele, NB are now outfitted with the latest and greatest ...

Southeast Welding

Installation Type 3000 Series CNC Plasma with Hypertherm XPR 300
Industry Custom Fabrication and Welding Company
Customer Since 2018
Website www.southeastwelding.ca

Denis & Christian Petitpas of Southeast Welding in Cap-Pele, NB are now outfitted with the latest and greatest MultiCam & Hypertherm technology. With the installation of the MultiCam 3000 Series Plasma table combined Hypertherm XPR 300 Power Supply these entrepreneurs are now cutting ahead of the competition.

The new Hypertherm XPR300® represents the most significant advance in mechanized plasma cutting technology, ever. This next generation system redefines what plasma can do by expanding its capabilities and opportunities in ways never before possible. With unmatched X-Definition™ cut quality on mild steel, stainless steel and aluminum, the new XPR300 increases cut speed, dramatically improves productivity and slashes operating costs by over 50%. New ease-of-use features and engineered system optimization make the XPR300 easier to run with minimal operator intervention, while also ensuring optimal performance and unmatched reliability.

+
MetalFab Firetrucks

MultiCam Canada recently installed a 3000 Series CNC Plasma for MetalFab Firetrucks. Metalfab LTD is a manufacturer

MetalFab Firetrucks

Installation Type 3000 Series CNC Plasma
Industry Firetruck Manufacturer
Customer Since 2018
Website https://www.metalfabfiretrucks.com

MultiCam Canada recently installed a 3000 Series CNC Plasma for MetalFab Firetrucks. Metalfab LTD is a manufacturer of custom manufactured Fire Apparatus located in Centreville, NB Canada. They specialize in units custom engineered to meet the specific needs of each customer. MetalFab Firetruck’s products include pumpers tankers, rescues, mini-Pumpers, and other fire-related apparatus. MultiCam’s 3000 Series CNC Plasma is the perfect choice for those looking for value in a machine tool quality CNC Plasma Cutting System. The rigid, all-steel plate frame design supports a variety of standard or high-definition plasma units and is combined with the industry’s easiest to-use operator interface, as well as the quality features, and high level of service that comes with owning a MultiCam.

+
Kawartha Stair & Rail Ltd

With over 34 years experience custom building stairs and railings, Kawartha Stair & Rail Ltd. has developed ...

Kawartha Stair & Rail Ltd

Installation Type 5000 Series CNC Router
Industry Stairs and Railing
Customer Since 2020
Website https://kawarthastair.ca/

With over 34 years experience custom building stairs and railings, Kawartha Stair & Rail Ltd. has developed into a leader in the industry serving the Kawarthas as well as the Muskokas and Haliburton areas. MultiCam Installed its 5000 Series CNC Router, a mid-size CNC router which boasts a 1,800 IPM cut speed, that will give Kawartha Stairs and Railing fast and efficient cuts every time. Designed for high-speed routing, the MultiCam 5000 Series CNC router can be used for a broad range of woodworking, plastic and non-ferrous metal applications, they are easily configured to meet most application requirements. A 3,000 IPM rapid traverse means the 5000 Series CNC router will move quickly enough to keep Kawartha Stair & Rail’s productivity high and since it’s made completely of steel, the 5000 Series remains durable through the toughest of workplace conditions.

+
Airia brands

Based out of London, Ontario, Airia brands is a manufacturer of residential indoor air quality products as well as ...

Airia brands

Installation Type 1000 CNC Waterjet with KMT Waterjet Streamline® SL-V Series

Based out of London, Ontario, Airia brands is a manufacturer of residential indoor air quality products as well as commercial indoor air quality systems. With 30 years experience, Airia brands Inc has become recognized as a leader worldwide in providing leading edge innovation through their Lifebreath line of indoor climate control and air quality products. MultiCam Canada was thrilled to recently install their 1000 CNC Waterjet and KMT Waterjet Streamline^® SL-V Series 60,000 PSI. MultiCam’s CNC 1000 Waterjet is perfect for companies who require a high degree of precision when it comes to cutting rubber, foam, vinyl and textile. Additionally, MultiCam’s CNC 1000 Waterjet comes with many customizable options such as two and three head configurations, laser pointer and a CNC computer interface station.

+
McTavish Steelworks

McTavish Steelworks LTD has been a manufacturer of steel based products in Manitoba since 1992 and is providing ...

McTavish Steelworks

Installation Type Hypertherm XPR 300

McTavish Steelworks LTD has been a manufacturer of steel based products in Manitoba since 1992 and is providing it’s customers with some great workbench and storage solutions. To further enhance their offering, McTavish has installed the latest in cnc plasma technological advancements by Hypertherm with the new XPR 300. The new Hypertherm XPR300® represents the most significant advance in mechanized plasma cutting technology, ever. This next generation system redefines what plasma can do by expanding its capabilities and opportunities in ways never before possible. With unmatched X-Definition™ cut quality on mild steel, stainless steel and aluminum, the new XPR300 increases cut speed, dramatically improves productivity and slashes operating costs by over 50%. New ease-of-use features and engineered system optimization make the XPR300 easier to run with minimal operator intervention, while also ensuring optimal performance and unmatched reliability.

+
QLIQ Innovations

QLIQ Innovations, based out of Brampton Ontario, is in the sign industry and specializes on bringing retail spaces ...

QLIQ Innovations

Installation Type APEX 3R CNC Router

QLIQ Innovations, based out of Brampton Ontario, is in the sign industry and specializes on bringing retail spaces to life. Their creative service offerings offered by QLIQ include concept design, visual displays, merchandise presentations and seasonal campaigns. QLIQ added our new router, the APEX3R Router to their facility and use the machine to cut various materials including acrylics and woods. Designed for a wide range of applications, the APEX3R is the perfect solution for companies looking for both value and high performance in a CNC Router. In the near future QLIQ also plans on adding a camera system to their machine which will allow them to cut pre-printed acrylic with fiducials.

+
CFM Service

CFM Services (a subsidiary of Irving Group) provides machining, fabrication, surveying and dimensional control, ...

CFM Service

Installation Type 3000 Series CNC Waterjet

CFM Services (a subsidiary of Irving Group) provides machining, fabrication, surveying and dimensional control, cranes and much more throughout Eastern Canada, the Northeastern United States and around the world. A 3000 Series Waterjet was installed at their facility in Saint John, New Brunswick. The 3000 Series was bought with the SLV Pro 3 intensifier (90,000 psi) to cut mainly stainless steel, aluminum and brass. They will mainly be cutting materials up to 2 inches thick, however will need the full power of the machine to cut up to 4 inches at times. CFM added the 3000 Series to their facility to complement their plasma capabilities and allow for high quality hole cutting so that they can tap holes without the need of re drilling at another location. With this new added ability, the streamlined process allows CFM to increase their capabilities and improve their operating efficiency.

+
Upper Grand District School Board

A V-Series Plasma was recently installed in one of the Upper Grand District School Board locations. Previous to the

Upper Grand District School Board

Installation Type V-Series CNC Plasma

A V-Series Plasma was recently installed in one of the Upper Grand District School Board locations. Previous to the machine installment, the school had plasma torches available for the students to learn with and use. The V-Series was installed so that the students are able to learn about and practice operating an automated plasma. This allows the students to learn about the various benefits of automated cutting, such as better edge quality and faster cutting. This also gives the students an idea as to whats available in the industry. The Plasma is used by Upper Grand for cutting various materials such as Aluminum and Steel.

+
CBD Glass

Located in Toronto, Ontario, CBD (Contemporary Glass Design) Glass has a fully equipped production facility in ...

CBD Glass

Installation Type 3000 Series CNC Waterjet
Industry Commercial and Residential Kitchen and Bath Products

Located in Toronto, Ontario, CBD (Contemporary Glass Design) Glass has a fully equipped production facility in which they create custom made glass counter-tops, back painted glass back splashes for kitchen and bath and much more. With their scientific research capabilities, they are able to offer their clients the advantages of in-studio innovations in texture, color, and forms. CBD added a 3000 Series Waterjet to their facility in Toronto, which has allowed them to create more intricate designs and given the capability for contour cutting. The 3000 Series also allowed CBD to expand their capabilities to offer unique products that wasn’t possible beforehand.

+
DNS Industries

Located in Concord, ON, DNS Industries provides custom manufactured retail displays, fixtures, and complete store ...

DNS Industries

Installation Type 5000 Series CNC Router

Located in Concord, ON, DNS Industries provides custom manufactured retail displays, fixtures, and complete store designs. They service companies nationally and internationally. DNS prides themselves on providing the utmost quality in their workmanship, coupled with outstanding customer service. They have worked with such companies as: Sony, Coca-Cola, Adidas and many more. DNS recently added a 5000 Series Router to their 20,000 square foot manufacturing space to work along with a 3000 Series Router that was previously installed to improve their manufacturing workflow even further through increased efficiency. The 5000 Series is designed for high-speed routing in a broad range of woodworking, plastic and non-ferrous metal applications, which are easily configured to meet all of DNS’s application requirements.

+
Ad Art Fabricating

Ad Art Fabricating, located in Cambridge, Ontario, specializes in sign fabrication, installation, maintenance and ...

Ad Art Fabricating

Installation Type 3000 Series CNC Router

Ad Art Fabricating, located in Cambridge, Ontario, specializes in sign fabrication, installation, maintenance and repair. They have the capacity to handle custom and large program orders for channel letters, awnings, wayfinding systems, parking signage, illuminated and non-illuminated fascia sign boxes including gas canopy cabinets, and much more. With the addition of their new MultiCam 3000 Series Router, they will be producing channel letters from 8″ all the way up to 13′. Their routing capabilities produce detailed and clean edges for the perfect finish.

+
Barbican Architectural Products Inc.

Barbican designs, manufactures and distributes commercial interior and exterior lighting and architectural products

Barbican Architectural Products Inc.

Installation Type 7000 Series CNC Router

Barbican designs, manufactures and distributes commercial interior and exterior lighting and architectural products throughout North America. Barbican’s customers include restaurants, schools, hotels, mausoleums, libraries, offices, conference centers, hospitals and many more. With locations in both Fort Erie, ON and Buffalo, NY, Barbican creates both custom and modular lighting systems, using a variety of materials. MultiCam Canada was thrilled to have recently installed one of our most robust CNC router systems, our 7000 Series. This is our most heavy-duty moving-gantry style systems, capable of a rapid traverse up to 3,000 IPM. Barbican will be using their 7000 Series Router primarily for routing aluminum.

+
Haystacks Media Production Limited

Haystacks Media is your one-stop-shop for print and display needs. Located in beautiful Halifax, Nova Scotia, they ...

Haystacks Media Production Limited

Installation Type 3000 Series CNC Router
Industry Display and Print
Customer Since 2015
Website www.haystacks.ca

Haystacks Media is your one-stop-shop for print and display needs. Located in beautiful Halifax, Nova Scotia, they have integrated display and decor, printing, and kit fulfillment in one company, to provide their customers with end-to-end media needs. A MultiCam 3000 Series Router was installed to help Haystacks deliver on their goal of being a one-step media solutions provider. The versatility and speed of the 3000 Router allows Haystacks to switch cutting jobs and materials quickly and seamlessly. We fitted the 3000 Router with a dual knife and router head. This allows Haystacks to switch between knife applications for materials such as cardstock, foam core, vinyls, and other thin materials, and router applications for materials such as acrylics, woods, and sign board. For more information on Haystacks Media Production Limited, check our their creative website here: www.haystacks.ca

+
JBR Designs Inc

JBR Designs Inc is a supplier of custom made displays, signage and digital print services. If you take a look ...

JBR Designs Inc

Installation Type MultiCam 3000 Series Router
Customer Since 2015

JBR Designs Inc is a supplier of custom made displays, signage and digital print services. If you take a look through their portfolio, you can see displays and signage for some iconic brands including Jagermeister, Molson Canada, and Sony. JBR Designs offers clients truly custom-fabricated solutions using their CNC routing and laser cutting capabilities. JBR has added a MultiCam 3000 Series Router to their production line-up. JBR cuts, engraves and re- creates logos, images and shapes for gifts, art installations, corporate displays, furniture, personalized items, and an assortment of other projects.

+
Precision Roofing and Siding

Precision Roofing and Siding, located in Wendover, ON, fabricates architectural products and custom steel roofing ...

Precision Roofing and Siding

Installation Type MultiCam 3000 Series Router
Industry Custom Steel Roofing And Siding
Customer Since 2015

Precision Roofing and Siding, located in Wendover, ON, fabricates architectural products and custom steel roofing and siding. You can see their work on hotels, universities, churches, and private residences. Apart from being steel specialists, PRS also fabricates and installs aluminum composite material (ACM) paneling. To cut ACM facades, Precision Roofing and Siding has installed a MultiCam 3000 Series Router with automatic tool changer. The 3000 Router is MultiCam’s flagship router. Rigid steel construction and powerful spindles makes this system perfect for the small-medium shops that need production-level performance at an affordable price point.

+
ABCO Industries

ABCO Industries Limited recently installed a 3000 Series WaterJet in their facility. Located on the waterfront of ...

ABCO Industries

Installation Type 3000 Series CNC Waterjet
Industry Metal Product Manufacturer
Customer Since 2014
Website www.abco.ca

ABCO Industries Limited recently installed a 3000 Series WaterJet in their facility. Located on the waterfront of the UNESCO World Heritage designated town of Lunenburg, Nova Scotia, ABCO Industries Limited is a world-class supplier and manufacturer of engineered metal products to processing and marine industries. The 3000 Series WaterJet has been installed in their 42,000 square feet facility with leading design and fabrication equipment on a 7 acre site on Lunenburg Harbour. MultiCam’s 3000 Series WaterJet is known for its unique advantages over other cutting technologies that allow the user to cut highly accurate parts with excellent finish and no heat affected edge. ABCO Industries Limited especially benefits from the machine’s production cutting solution designed for manufacturers that want the ability to cut a wide variety of metals.

CNC Machines
Support
Installations
CNC Knowledge Base
E-Commerce
Financing
Contact Us

MultiCam Canada

CNC Machines
Support
- Service and Parts
- Training and Installation
Installations
CNC Knowledge Base
E-Commerce
Financing
Contact Us

© 2019

CONTACT US